Are you in need of a good recovery tool? If so you should check out the ClockworkMod Recovery. This is one of the best and most popular recovery tools for Android users. It is now available for the Galaxy Tab 10.1.3G. With the help of Odin, it can be flashed right away on your device. In our post today, we will give you the steps to install this onto your device.
Step 1: Download Odin. [Download link].
Step 2: Extract the downloaded .zip file. [Download link].
Step 3: The next step is to download the ClockworkMod Recovery 5 image file.
Step 4: Tap the Volume Down Button + the Power Button + Volume Up Button. In this step you are turning off your phone and booting it into the download mode.
Step 5: Connect your Samsung Galaxy tab 10.1 3G to your computer by connecting the USB data cable.
Step 6: Open up the folder that you extracted the Odin .zip file into and click on the PDA button.
Step 7: Select the image file of ClockworkMod Recovery 5. You will see it as recovery.tar.md5
Step 8: Now that you have selected the recovery image file, you will click on the Start button.
Step 9: Once you select Start, the installation process has started and it will take about 2 – 3 minutes to finish.
Step 10: After the install process is finished, you can disconnect your device from the computer.
Step 11: When you turn on your device, you should now see CWM Recovery 5 installed on your tablet.
It’s not too difficult and it should now be on your tablet. To test it to make sure that it has worked, try getting into recovery mode. You can access recovery mode by pressing the Volume Up Button + Center Button + Power Button. The CWM Recovery has successfully been installed if you are now in recovery mode.